Emergency Lights
NICEIC Installer

Emergency Lighting


Compliant Emergency Lighting System  for Any Emergency

Emergency lighting provides a minimum level of illumination to enable the safe exit of buildings in the event that normal lighting supplies fail.

Following a mains failure or circuit fault, luminaires provide an instant light source for the escape routes and open areas to achieve minimum level of illumination for a defined minimum period.

There is increasing recognition of the application of emergency lighting to assist the safety of occupants who stay in a building during a mains supply failure. In many instances, particularly in places with frequently occurring power cuts, it might not be necessary or appropriate to evacuate the premises in the event of failure of the supply to the normal lighting, but precautions need to be taken to enable occupants to remain on the premises in safety. 
Emergency Light Exit Sign

Emergency Escape Lighting

To provide illumination of escape routes, signs and points of emphasis to assist occupants to evacuate the premises

Button
Emergency Light Exit Sign

Emergency Safety Lighting

To provide lighting for safe movement in the premises when the occupants need not evacuate the premises immediately

Button
Emergency Light Panel

Standby Lighting

Powered by an alternative power supply, which provides sufficient lighting to operate the premises normally in the event of a total failure of the main power supply

Button

Standards & System Types

Check Fire & Security offer fully compliant emergency lighting systems to guide your staff to safety in an emergency at affordable prices. From Design, Supply, Installation, Commission & Handover of a new system, to the Inspection, Test & Maintenance of an existing one, Check can provide and maintain emergency lighting systems to suit all environments. 
BS 5266-1

BS 5266-1

Sytems Design, Installed, Commissioned & Maintained in accordance with BS 5266-1

Button
Lux Tester

BS EN 1838

Systems provide sufficient illuminance in accordance with BS EN 1838

Button
Emergency Light Test Switch

BS EN 50172 (BS 5266-8)

All systems are fully maintained and tested in accordnace with BS EN 50172 (BS 5266-8)

Button
Emergency LED Lighting

BS EN 60598-2-22

Luminaires fully compliant with BS EN 60598-2-22

Button
LED Emergency Lighting

BS EN 62034

Automatic Test System fully compliant with BS EN 62034

Button
Emergency Lighting Install

BS EN 50171

Central power supply systems fully compliant with BS EN 50171

Button


If you need a emergency lighting system, are considering upgrading and/or adding to your existing system, or would simply like to learn more about emergency lighting systems why not give us a call today on 

0800 066 2249


Share by: